Safe digging goes beyond locating utilities—it requires proper trenching practices and the right equipment to protect your crew. Contractors should follow established guidelines for trench depth, soil conditions, and protective systems such as shoring or trench boxes to reduce the risk of cave-ins. At BSE Rents, we support safe and efficient jobsite operations by providing well-maintained trenching equipment, compaction tools, and expert guidance to help you get the job done right. This April, take the extra step to plan ahead, call 811, and ensure every dig is a safe one.March is National Ladder Safety Month, led by the American Ladder Institute, and it’s an important reminder that falls remain one of the leading causes of serious injuries and fatalities in construction. According to the Occupational Safety and Health Administration, falls from elevation consistently rank among the “Fatal Four” hazards on jobsites. Daily ladder inspections, confirming proper load ratings, and ensuring stable, level setup are foundational safety practices. Extension ladders should follow the 4:1 rule, extend at least three feet above the landing surface, and be secured whenever possible to prevent movement.
Material selection is equally critical—especially when working around electricity. Fiberglass ladders are non-conductive when clean and dry, making them the safer choice for electrical work or when exposure to live circuits is possible. Aluminum ladders, while lightweight and durable, conduct electricity and significantly increase the risk of electrocution near power sources. Crews should maintain three points of contact while climbing, avoid standing on the top cap of step ladders, and never overreach—climb down and reposition instead. At BSE Rents, we are committed to providing safe, job-ready equipment and reinforcing best practices that keep crews protected. Ladder Safety Month is the perfect time to review fall protection procedures, evaluate your equipment, and ensure your team has the proper access equipment for the job.

